|
The A3000U equipment is an all-round
solution to perform non-destructive structural investigations on deep
foundation elements, infrastructure facilities or buildings.
The system features a compact computer-assisted central unit where to
connect – according to the type of the investigation needed – direct
contact transducers or electronically controlled motor-operated reels
with high power hole probes (Cross-Hole investigations).
The central unit comprises an ultrasonic generator (two high frequency
channels), as well as all the electronics that supervises probes descent
and withdrawal (Cross-Hole). It also controls the data recording process
on a built-in memory or on an external memory (USB type).
Thanks to an intuitive user interface, all the features are easily
selected through navigable menus on a 6.4” LCD transflective display (touch
screen). |
|
Equipped with the following accessories:
Continuous descent motor operated probes (frequency ~ 50 KHz, dia.
35 mm.)
Hole encoder to monitor probes descent (100 pulses/rev.)
Cable reels (60 m) for motor operated probes
12V battery box equipped with electronics to monitor hole probes
Resonant frequency contact probes ~50 KHz, dia. 3.50 cm
DG-WIN Image Effect (diagraphy) data interpreting software
Calibration rod made of PVC
Containers for motor operated cable-storage reels and encoders
Kit for I.T. TEST echometric tests (optional)
Kit for tests on masonry structures complete with instrumented
hammer (optional)
USB printer for printing directly on site (optional) |
 |
|
TECHNICAL SPECIFICATIONS
Continuous descent motor operated probes (software controlled)
Automatically controlled probes alignment
640 monitoring points
Zoom Window tool to examine measurement details
Fully software-programmable
Software settings: amplification 1 mV-10 v; time base from 50
nanoseconds to 50 milliseconds; capacity 500V/2000V; pulses emitted:
1 per second; complete or partial display of the acquired data ;
manual or automatic cursor (reading in microseconds); speed
calculation
500 MHz CPU VIA Technologies Inc. chipset
LCD transflective 6.4” touch-screen colour display
Data recording on built-in Disc On Module (solid-state circuit
and/or on USB memory)
LAN 10/100 interface for remote control and diagnosis
USB interface for external units
VGA interface, external display, PS2 port, mouse and keyboard
Intuitive operating software
Data recording on internal HD, solid-state, USB memory
Easy-to-use setting options to export data
Integrated multilingual interface
Dimensions: 280x220x170 mm
Weight: 3.8 kg |